Feed Timer - Philips AVENT SCD570/00 Manuel De L'utilisateur

EngliSh
10
Sensitivity levels and indications
Icon

Feed timer

You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from
1 minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select 'Feed Timer' in the menu. Press OK to confirm.
2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu. Press OK to confirm.
The timer symbol appears on the display and the timer starts counting down (Fig. 13).
5 When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
flashing on the display and the message 'TIMER END' scrolls across the display (Fig. 14).
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
Setting the feed timer repeat
1 To make the feed timer go off after the same set time, select 'Timer repeat' in the feed timer
submenu after you have set the timer. Press OK to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer repeat symbol
appears on the display (Fig. 15).
3 If 'Repeat ON' is set, the feed timer starts counting down again after you stop the alert.
Setting a feed timer alert
1 To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to confirm.
2 Choose one of the alert options. The options available are sound only, sound and vibration
and vibration only.
3 Press any key to stop the alert or the alert stops automatically after 2 minutes.
Sensitivity Description
highest Hear everything from your baby. The speaker of the
parent unit is continuously on.
high Hear all sounds from soft babbling and louder. If your
baby does not make any sound, the speaker of the parent
unit is off.
medium Hear sounds from soft cries and louder. If your baby
makes softer sounds, the speaker of the parent unit does
not go on.
low The speaker of the parent unit only goes on if the baby
makes loud sounds, for instance because it is crying.