Thermador Masterpiece HMWB30WS Guide D'utilisation Et D'entretien page 13

Masquer les pouces Voir aussi pour Masterpiece HMWB30WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Step 2 (initial start-up): Connecting your
hood to your home network (Wi-Fi)
A. Connect the appliance.
B. Check whether your home network router has A WPS
function (automatic connection) and locate the WPS
button. Refer to the router manual for more information.
C. Does your router have a WPS function (automatic
connection)?
Now go on to Step 2.1 –
Yes
Automatic connection
(WPS).
Now go on to Step 2.2 –
No
Manual connection
(Professional mode).
Step 2.1: Automatically connecting your
hood to your home network (Wi-Fi)
Press SPEED 1 button.
CONNECT and SPEED 1 buttons flash.
WPS connection process started.
A. Note: To connect the hood to your home network,
the hood and the light must be switched off.
You can cancel the process at any time by pressing
"0".
B. Press and hold the "CONNECT" button until "0"
and "CONNECT" start flashing.
C. Press "1".
Note: "1" and "CONNECT" will flash.
D. If you have WPS (see previous page) press the WPS
button on your router.
Note: Please consult your router's manual to locate
the WPS button.
E. When "CONNECT" and "3" flashes your appliance
is connected to the home network.
Go on to step 3.
Error: If the "CONNECT" and "2" light flashes then the
hood could not establish a connection with your home
Wi-Fi within 2 minutes.
Fix: Check whether your hood is in range of your Wi-Fi
and repeat the process. If unsuccessful, refer to step 2.2
to connect the oven manually.
Use and Care Guide
Step 2.2: Manually connecting your hood
to your home network (Wi-Fi)
A. Note: To connect the hood to your home network, the
hood and the light must be switched off.
You can cancel the process at any time by pressing "0".
B. Press and hold the "CONNECT" button until it start
flashing.
C. Press "2".
Note: "2" and "CONNECT" will start flashing.
D. Open general settings on your mobile device and then
open Wi-Fi settings. Connect to the network named
"HomeConnect".
This is your hoods Wi-Fi-network.
Use the following
login information to connect:
Wi-Fi-Name/SSID: HomeConnect
Password/Key: HomeConnect
E. Open the Home Connect™ App on your mobile device.
F. The app will prompt you to enter your home Wi-Fi's
network name and password.
Note: The app may take a few minutes to find your
hood.
G. Next, follow directions in the App.
H. When "CONNECT" and Fan Setting "3" flashes your
appliance is connected to the home network.
Go on to step 3.
Error: The appliance fails to connect to the app (The
"CONNECT" light will turn off).
Fix: Ensure your smartphone or tablet is connected to
the same home network (Wi-Fi). Check that your wire-
less connection is stable and has a strong signal. Then
repeat the process from step 2.
English | 13 |

Publicité

Table des Matières
loading

Table des Matières