Indicator Leds And Status Text On The Onboard Display Panel - Kussmaul Electronics Kussmaul Chief Auto Charge Guide D'utilisation

Reading Icons and Text
Indicator LEDs and Status Text on
the Onboard Display Panel
All indicator LEDs on the Onboard Display panel (and the optional
remote panel, if installed) will illuminate for one second when AC
or DC power is supplied to the Auto Charge.
The Auto Charge will recover from alert conditions automatically
when the cause of the alert has disappeared. Under a reverse
polarity condition, the charging process will be stopped until
further user action fixes the condition. See Physical
Specifications on page 72 for more information on normal
operating ranges.
To interrupt or cease the charging process, disconnect the AC
power source from the charger.
Table 6Onboard LED and Display Text
LED
58
Battery
Description
Bank
The charger is in Standby
--
(Energy Saving) mode.
The charger is in float mode.
Float
The battery has been fully
charged.
Battery
LED
Bank
Abs
Bulk
Eqlz
Eqlz
Alert
Alert
Kussmaul Chief Auto Charge Battery Charger Owner's Guide
Description
The charger is charging in
absorption mode
The charger is charging in bulk
mode
The charger will perform an
equalization cycle after the
absorption stage.
The charger is currently
implementing an equalization
cycle for all batteries.
A warning alert condition. See
Table 7.
A reverse polarity or any fault
condition that would stop all
charging functions. See Table
7.