MTD Yard Machines MTD599 Manuel De L'opérateur page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
8.
Make sure to insert the spring, assemble the spool
and spool carrier back onto the trimmer. To do so,
push the head on and turn it clockwise until it locks.
(Fig. 27 and Fig. 28)
9.
To test if the line is advancing properly, push the but-
ton with your thumb while pulling the line with your
fingers. The line should advance freely. (Fig. 29).
10. In the event of the line breaking inside the spool,
repeat the replacement operation.
11. Start the grass trimmer following the instructions in
the "STARTING" section.
Fig. 27
Fig. 28
Fig. 29
MAINTENANCE INSTRUCTIONS
www.mymowerparts.com
www.mymowerparts.com
MAINTENANACE
CAUTION:
operations, cut off the electric power supply by
disconnecting the battery pack from the hous-
ing.
1.
Regular cleaning and maintenance of your string trim-
mer will ensure efficiency and prolong the life of your
machine.
2.
After each cutting operation, take apart and clean out
the grass and soil from: the spool and its slot, the
whole trimmer and in particular the guard.
3.
During operation, keep the air slots clean and free of
grass.
4.
Only use a cloth soaked with hot water and a soft
brush to clean the string trimmer.
5.
Do not spray or wet the appliance with water.
6.
Do not use detergents or solvents as these could ruin
the trimmer. The parts in plastic can easily be dam-
aged by chemical agents.
7.
If the line cutting blade no longer cuts or breaks, have
this replaced by contacting an professional service
center.
CAUTION:
cuts. For repairs which have not been
explained in these instructions, contact a pro-
fessional service center.
8.
This appliance has no internal serviceable parts. Do
not attempt any repairs. Doing so could create a haz-
ard and void the manufacturer's warranty.
12
Before carrying out
any
maintenance
The
line
cutting
blade can give deep

Publicité

Table des Matières
loading

Table des Matières