Maintenance Instructions - MTD Yard Machines MTD599 Manuel De L'opérateur

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
9. SWEEPING - DO NOT SWEEP WITH TRIMMER
(Fig. 15)
10. DO NOT BUMP TRIMMER ON CONCRETE. This
can damage the stringhead (Fig. 16).
Fig. 15
REPLACE THE SPOOL OF NYLON LINE
1. Unplug the trimmer.
2. Remove the spool assembly from the trimmer. To do
so, hold the outer ribbed part of the assembly with
one hand, while pushing down and turning the spool
head with the other to unlock it. (Fig. 17 & Fig. 18) The
spool carrier and spool will now disassemble easily.
NOTE: There is a spring inside the spool head that
could easily be lost. Ensure that it is put in a safe
place.
Fig. 17
OPERATING INSTRUCTIONS

MAINTENANCE INSTRUCTIONS

www.mymowerparts.com www.mymowerparts.com
3. Remove the clear plastic line retaining ring. Remove
any existing line from the spool.
4. Using 0.065" replacement line measure off approxi-
mately 14' of line. Double over the cutter line into two
equal lengths and place loop in slot of the spool
divider (Fig. 19).
10
Fig. 16
Fig. 18
Fig. 19