Overflow Function - Olympia CPD 440 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
OFF ON ITEM
Power ON/OFF Switch
ON
OFF
ON
OFF
Overflow function
In the following cases, "E" will be displayed and the keyboard is
electronically locked, the further operation is impossible. Press CE/C
to clear the overflow.
Overflow Error Condition:
1. When the calculated result exceeds 12 digits.
2. Dividing by "0".
3. The sequential operation speed is faster than the calculation
processing speed.
Specifications
Power Source: AC120V, 60HZ(UL); AC220-240V, 50HZ(GS)
Calculating Capacity: 12 digits maximum.
Dimension: 287 mm (L) × 188 mm (W) × 65 mm (H)
Ink Roll: IR40T
Paper Tape: Width: 57 mm
Diameter: 80 mm (max)
Note
If you experience problems with the calculator, please press the
RESET button at the back of the calculator. After resetting, be sure
to set the calendar, clock, currency exchange and tax rate again.
Set switch to ITEM to print the number of times the
+ and – keys have been pressed (up to 999).
When the ◊ * , M◊ or M* keys are pressed the
item count will be printed on the paper roll.
POWER ON.
POWER OFF.
13

Publicité

Table des Matières
loading

Table des Matières