Yamaha RM-CR Manuel D'installation page 11

4 [MIC IN] 1/2 jacks
These are XLR jacks (balanced) for connecting dynamic mics. Do not connect
condenser mics here.
5 [RESET] button
Use a fine-pointed object such as an eject pin to press this button.
Long press
4 seconds to less than 8
seconds
8 seconds to less than
12 seconds
Long-pressing this button for less than 4 seconds or for 12 seconds or more does not
reset anything.
6 [SETUP] port
This port is for connection to a computer so that settings can be made via a web
browser. Use the included USB cable (A-micro B type) for this connection. For details
on settings, refer to "RM-CR Reference Manual."
Status indicator
Flashes twice per
second
Flashes three times
per second
Reset target
Network-related settings
All settings
(automatically restarts after initialization)
RM-CR Installation Manual
11