Explanation Of Symbols; Charging The Battery - EarthWise LSS10163 Manuel De L'utilisateur

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Precautions that involve your safety.
CAUTION! Read the instruction manual and follow the warning and safety instructions!
CAUTION! Always wear eye protection.
Do not use in rain or electrical storms.
WARNING! The cutting blades continue to move after switching off.
WARNING! Keep bystanders away.
Only use the battery charger indoors.
Battery charger contains a safety transformer.
The battery must be fully charged before using

for the first time. The charging time is 3 to 5
hours. (See page 5 for instructions.)
The battery charger supplied matches the

lithium battery installed in the tool. DO NOT
use any other charger to recharge the tool.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.

EXPLANATION OF SYMBOLS

CHARGING THE BATTERY

3
To protect the lithium battery against deep

discharging, when the battery is flat, the tool
will automatically switch off via a protective
circuit.
If the On/Off switch is used continually at this point,
the lithium battery can be damaged. Do not try to
continue to use the tool before recharging the
battery.