Default Working Times; Cooking Guidelines - EAS ELECTRIC EMIH290-FX Manuel D'instructions

The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes.
The shown as below:
Once the countdown timer expires, the corresponding zone
will switch off. Then it will show the new min. timer and
the dot of corresponding zone will flash.
The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
c) Cancel the timer
Touching the heating zone selection control that you want
to cancel the timer.
Touching the timer control, the indicator flash.
Touch the slider control to set the timer to "00", the timer is cancelled.

3.3.9 Default working times

Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever
you forget to turn off your cooking. The default working times for various power levels are shown in the
below table:
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
People with a heart pace maker should consult with their doctor before using this unit.

4. Cooking Guidelines

Take care when frying as the oil and fat heat up very quickly, particularly if you're using
PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this
presents a serious fire risk.
(set to 15 minutes)
、、、
(set to 45 minutes)
1 2
8 8
(set to 30 minutes)
3 4 5
8 4 4
17
6 7 8 9
4 2 2 2
V.2