Using The Boost Function; Flexible Area - EAS ELECTRIC EMIH290-FX Manuel D'instructions

Beware of hot surfaces
H will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving
function if you want to heat further pans, use the
hotplate that is still hot.

3.3.3 Using the Boost function

Touching the heating zone selection control
Touching the slider to "b". Make sure the display shows "b".
Touching the heating zone selection control that you wish
to cancel the boost function
Select a heat setting by touching the slider control.
•
The function can work in any cooking zone.
•
The cooking zone returns to its original setting after 5 minutes.
•
If the original heat setting equals 0, it will return to 9 after 5 minutes.

3.3.4 FLEXIBLE AREA

• This area can be used as a single zone or as two different zones, accordingly
to the cooking needs anytime.
• Free area is made of two independent inductors that can be controlled
separately.
As big zone
1.
To activate the free area as a single big zone, Touching the Flexible Area control .
Activate the boost function
Cancel the Boost function
12
power up
power down
V.2