Labeling Channels; Setting The V-Chip - JVC LT-39E330 Manuel D'instructions

Labeling channels

Channel labels appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any 7 characters to identify a
channel.
To create channel labels
1
Select "Channel ⇒ Channel Number".
2
Press ◀ or ▶ to select a channel you want to
label, then press ▼ to select "Channel Label".
Then press ▶ or ENTER.
Picture Sound Time
Air/Cable
Automatic Search
Channel List
Show/Hide
Channel Number
Channel Label
3
Press ▲ or ▼ repeatedly until the character you
want appears in the first space.
Picture Sound Time
C H
If the character which you desire appears, press ▶.
You can also change the position which input
character by pressing ◀ or ▶.
Repeat this step to enter the rest of the characters,
then press ENTER.
4
Repeat steps 2-3 for other channels. You can
assign a label to each channel.
5
When you finish inputting the label name, press
EXIT to return to the normal screen.
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 20.
Setup Lock Channel
Cable
23
CH-2
Setup Lock Channel
2

Setting the V-Chip

An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you
may choose to exclude. The restriction applies to
"TV Rating" and "Movie Rating" if this data is
transmitted. You may set this restriction separately.
To use the V-Chip function, you must register a
password.
To register a password
1
Select "Lock", then press ▼.
2
Press 0000 using Number buttons(0-9). (This is
default password.)
Picture Sound Time
Enter Password
" " appears instead of the number.
NOTE:
• If you forget the password, contact Customer
Service at 1-800-289-0984 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
How to enter the V-Chip menu
1
Select "Lock" menu, then press ▼.
2
Use Number buttons (0-9) to enter your
password.
To Lock the connected devices
1
In the Lock menu, press ▲ or ▼ to select "V-Chip",
then press ◀ or ▶ to set to "On".
2
Press ▲ or ▼ to select "Input Block", then press ▶
or ENTER.
Picture Sound Time
TV
AV
Component
HDMI1
HDMI2
PC
Media
3
Press ▲ or ▼ to select which device will be
blocked, then press ◀ or ▶ to select "Block".
NOTE:
• Blocked device will appear in Source Select
window. Enter your password before watching.
If you want to use a device again, "UnBlock" as
indicated in step 3.
Setup Lock Channel
Setup Lock Channel
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
21 EN