Displaying The Software And Hardware; What To Do When - AMC Visiotherm Notice D'utilisation

EN
2.5.3

Displaying the software and hardware

”
Simultaneously press and hold the
–
ƒ After a short indication of all the display
symbols, the software number (e.g. 012)
and then the hardware number (e.g.
H01) appears.
3.

What to do when...

...a cooking program is selected that is not available on the Visiotherm being used?
When the Audiotherm is put on, an error tone sounds and the selected cooking program disappears
from the display.
”
Check to see which program should be used to cook.
...the Audiotherm that has been set to a program loses contact with the Visiotherm?
An error tone sounds.
”
Join the Audiotherm and Visiotherm together correctly.
...the following error messages appear?
E: 01
Audiotherm hardware error.
”
Contact customer service.
E: 02
”
Check that all components are correctly positioned and restart the cooking process.
E: 03
”
Switch the Audiotherm off. Remove any sources of magnetic interference from the sur-
rounding area.
”
Switch the Audiotherm on and restart the cooking process.
”
If the error occurs repeatedly, contact customer service.
E: 04
Navigenio hardware error.
”
Contact customer service.
26
-button and middle button.