Delivery Content; First Steps; Network Requirements; Preparing The Network - Albrecht DR 884 Manuel D'utilisation

3. Delivery content

The following accessories are
included in the delivery:
1. DR 884 radio
2. Power cable
3. Remote control incl. batteries
4. Manual

4. First steps

4.1. Network requirements

Before using the DR 884, the following requirements must be met:
● Broadband connection with a wireless access point, router or similar network device.
● The network device must support WLAN (802.11b/g/n) wireless connection.
● If you want to remotely control the DR 884 via DLNA, you will need a PC or smartphone
connected to the same network as the DR 884.

4.2. Preparing the network

• Establish a WLAN connection as follows:
• Make sure that the WLAN indicator on the wireless access point or router is lit.
Please refer to the corresponding user manual for further information.
Please note: WLAN allows data transmission over short distances up to 20 m without
cables. Walls or ceilings reduce the range of the WLAN connection. Therefore, place
the DR 884 and/or the access point within this distance as much as possible and avoid
obstacles between the devices.

4.3. Getting started

Connect the mains adapter to the back of the DR 884 and connect the mains plug to an electrical
outlet. Connect the supplied antenna to the antenna input on the back. Alternatively, connect your
antenna system/indoor antenna with the supplied antenna adapter.
When using the device for the fi rst time, please select a language and a wireless network.
32 English