Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
Installation
Location
The ERV must be located in a conditioned space where it will be possible to conveniently service the unit. Typically the ERV would be located in the
mechanical room, above a drop ceiling or an area close to the outside wall where the weatherhoods will be mounted. Attic installations are not normally
recommended due to extreme temperatures, and difficulty in performing required service & maintenance. If an attic is selected, special care should be
taken in ensuring the unit will perform as intended. Unit may need to be protected with an insulated shelter built on site.
Connecting appliances to the ERV It is not recommended, including:
• clothes dryer
• kitchen exhaust hoods
• combustion venting
• central vacuum system
These appliances may cause lint, dust or grease to collect in the ERV , damaging the unit.
Connecting any of these type of appliances to the ERV will invalidate your warranty
Model
A
Kg
SER 6004
21.7
SER 9504
27.4
SER 13004
31.4
fantech
B
C
lbs
Kg
lbs
in.
47.8
20.4
44.9
15.4
60.5
24.3
53.5
21.4
69.3
25.8
56.9
10
A
C
D
E
mm.
Kg
lbs
Kg
390
76
168
17.8
544
97.5
215
24.7
254
102.5
226
26.7
B
F
D
E
G
F
lbs
Kg
lbs
39.3
16.6
36.6
54.5
21.3
47
58.9
21.2
46.7
G
in.
mm.
17.6
448
18
455
19
483
Publicité
Chapitres
Table des Matières
