Clock Operation; Mode Selection - Rockford Fosgate RFX Serie Manuel D'installation Et Fonctionnement

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

O
– B
PERATION
ASIC
SUM FLAT [80HZ] — Means third pair of RCA pre-outs is full-range while 80Hz means that the
pre-outs are crossed-over 80Hz low-pass for subwoofer use.
PANEL AUTO [PANEL MANU] — Automatically opens and closes Panel when loading or
ejecting discs while PANEL MANU allows the front panel to remain open and CDs to be
manually loaded or ejected. Allows use of radio with the panel down.
SCROLL ON [SCROLL OFF] — Titles scroll across panel screen. Scroll Off prevents scrolling.
AUX1 IN 0 [+6, –6] — Allows you to boost the input volume of a weak external audio source
or diminish a powerful one. Useful for external sources: MP3 players, video games, VCPs, etc.

CLOCK OPERATION

Setting the Clock Hours
1. Press and hold the DISP button for 1 second until the hour flashes.
2. Press UP or DN {Down} button to set the hour.
Setting the Clock Minutes
1. Press and the DISP button a second time and the minutes will flash.
2. Press UP or DN {Down} button to set the minutes.
Your settings will be saved after the clock has flashed for 5 seconds.
NOTE: When the radio is off (sleep mode) the clock will be displayed.

MODE SELECTION

Press the MODE button repeatedly to cycle through the following modes:
CDP PLAY — Enables CD Player if a CD is inserted.
AUX1 — Allows for an external audio source to attach to the sound
system.
TUNER — Enables the Tuner.
MUTE
1. Press the MUTE button to dampen the volume.
2. Press the MUTE button a second time to revert the audio to the
previous level.
NOTE: The panel will display MUTE until the function is canceled.
PUNCH
The Punch button enables the bass and treble response of the audio output to
be boosted for all listening levels.
1. Press the PUNCH button to enable the Punch feature.
2. Press the PUNCH button again to disable.
NOTE: The panel will display "Punch" when the Punch feature is on.
PANEL DISPLAY
Tuner Mode:
The panel will display the band, FM1, FM2 or AM1, and the station frequency, unless the default
has been changed to TITLE DEFAULT and a station title has been programmed in.
12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rfx9220Rfx9220gRfx9220r

Table des Matières