Smartpond 84572 Mode D'emploi page 10

MAINTENANCE
Regular cleaning of the pump may be necessary depending upon
the environment which it is operated. Clean the pump when it is
visibly soiled or when a drop in performance is detected. Clean
pump in 4 easy steps!
Step 1: Before cleaning, always disconnect the pump from the
power source and remove the pump cover.
Step 2: Remove the
impeller cover to expose
the impeller assembly.
Remove the impeller
assembly by gently
pulling on the impeller
blades. The impeller
is held in place by a
magnet.
Note: Do not remove the
metal shaft from inside
the impeller housing.
Step 3: Use a soft cloth
or brush and warm water
to clean the impeller and
the inside of the impeller
housing.
Step 4: Reassemble
all pump parts and
place in water before
reconnecting to the
power source.
10
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.