Dometic DM50 Instructions De Montage Et De Service page 18

Installation
Observe the following:
• The cut-out dimensions H x W x D are:
– DM50D: 428 x 570 x 485 mm
– DM50F: 428 x 570 x (485 + d) mm
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 5 mm.
• The ventilation openings for the chosen alternative have to be produced as
shown in fig. 7, page 6.
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
6.2 Pressing out the ventilation opening
fig. 9, page 7
➤ Produce a ventilation opening of 30 x 300 mm in the bottom of the furniture into
which you place the minibar.
Measure the distance of 470 mm from the minibar's door front excluding any
own decor.
6.3 Mounting the minibar into a piece of furniture
No in
fig. 0, page 7
1
2
3
4
5
6
➤ Fasten the minibar with the four screws ø4 x 45 mm (fig. 0 1, page 7).
➤ Insert the four plugs (fig. 0 2, page 7) into the boring.
18
Description
Screw ø4 x 45 mm
Plug
Furniture
Ventilation opening
Filter
Screw ø3 x 12 mm
DM50
EN