Connecting Your Ipod - Belkin TuneSync F5U255ea Manuel De L'utilisateur

Setting up your iPod

Connecting your iPod

TuneSync holds your iPod upright as it charges or transfers music. Using
TuneSync, you can play music from your iPod over external powered
speakers or a home stereo. You need an audio cable with a standard
3.5mm stereo mini plug (many external speakers already have this type
of cable attached).
1. Before you dock your iPod, install the proper insert into the dock on
Installing the proper insert:
• Check the bottom of each insert for the label that identifies your iPod
• Place the insert into the dock.
• Press on both sides to ensure it sits firmly in place.
2. After doing so, simply place your iPod into the dock.
Note: Orient the connectors on the dock and your iPod correctly—the iPod
EN
Note: TuneSync will charge your iPod while your iPod is in the dock
3. A blue status LED will light once you have docked your iPod and your
4. You are now ready to play or transfer music to and from your iPod.
Setting up your iPod
F5U255ea.indb 8
the front of the hub. Then you can plug in your iPod.
player's generation type and memory size.
should face forward. Each connector can only be inserted one way.
computer recognizes it.
8
11/8/2005 10:06:41 AM