Eaton Cooper Lighting PORTFOLIO C6042 Instructions D'installation page 3

Installation Instructions – C6042, C7042 and C8042 Commercial Recessed Compact Fluorescent Rough-In
To Clean Trims
1. Gently wipe with a soft, clean, dry lint-free cloth to
remove dust.
2. Wipe with a mild detergent solution on a soft, clean
cloth to remove fingerprints and stains.
3. Rinse with clean, soft water and dry with lint-free cloth.
A
D
C
Figure 3.
Wall Wash Diagram
B
Installation Instructions – C6042, C7042 and C8042 Commercial Recessed Compact Fluorescent Rough-In
For Wall Wash Installations, housing is to be installed
N otee:
with one of (4) sides (A,B,C,D) facing the wall. Wall
wash trims can be oriented with stepped reflector
facing wall. Use secondary screws supplied with trim
for alternate orientation. It may be necessary to fully
tighten screws on housing first. Install screws 180°
apart. (Figure 3.)
HOT - BLACK
NEUTRAL - WHITE
Figure 4.
702981 ADP140646 www.eaton.com
RED
RED
BLUE
BLUE
BALLAST
Wiring Diagram
3