Using Your Refrigerator; Setting The Operating Temperature; Led Indicators And Control Panel; Thermostat Setting Button - Teka TGI2 200 NF Manuel D'instructions

5

Using your refrigerator

Setting the operating
temperature
1
The operating temperature is regulated
by the temperature control.
Warm
1 = Lowest
(Warmest setting)
5 = Highest
(Coldest setting)
The average temperature inside the
fridge should be around -18°C.
Please choose the setting according
to the desired temperature.
You can stop operation of your device
by pressing on/off Button (1).
Please note that there will be different
temperatures in the cooling area.
The coldest region is immediately
above the vegetable compartment.
The interior temperature also depends
on ambient temperature, the frequency
with which the door is opened and the
amount of foods kept inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
2 3
Cold
cooling setting
cooling setting
4
LED indicators and control
panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of your
appliance.
Keep your food in the refrigerator in a
safe manner by monitoring and using
these LEDs and controls as explained
below:
Quick Freeze Button (6): Used to
freeze the food quickly. Compressor
may not operate immediately but after
some time when the button is pressed
and this is quite normal.

Thermostat Setting Button (2):

Used to set your refrigerator between
minimum and maximum values.
Temperature Indicator (4): Displays
the set temperature of your refrigerator.
Snow freeze LED (5): Lights up
when the quick freeze button on the
LED panel is pressed. In this case, your
refrigerator operates continuously.
Press the button again when the food
you would like to quick freeze comes to
the desired temperature and the snow
LED will turn off.
12
EN
5 6 7