Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VOKKERO GUARDIAN EUROPE Standard | Plus | Ref | User Guide V2.1.2
3.4.4.
"Micro" button (Latch mode by default)
Adjust the Microphone setting using the Micro button.
The microphone can be configured in various modes using the configurator; for full information
on available modes, refer to §4.3.1.
Check the microphone status on the terminal LCD:
•
if there is a Struck-through micro icon, then the microphone is Off and you can be heard
on the network.
•
if there is no Struck-through micro icon, then the microphone is On and you cannot be
heard on the network.
3.4.5.
Call button
Use the Call button to send an alert to all the terminals on the network; concretely, the
terminal gives off a beep for 1 second and vibrates for 4 seconds and the LED above the On/
Off button blinks.
The terminal screen displays the "Call" icon, as well as the name of the terminal.
All the other terminals connected to the network behave in the same way, namely, beep for 1
second, vibration for 4 seconds, LED blinking, and the calling terminal displays.
Note: if the "GROUP" function is active, then the notification is only sent to that group to
which the calling terminal be-longs.
3.4.6.
Locking the terminal
You can lock the terminal by pressing and holding the Channel button.
The locked functions are as follows:
•
Channel
•
Push To Talk
•
Bluetooth (option)
By contrast, even if the terminal is locked, the following functions are made available:
•
Volume
•
Call
•
On/Off
The 'Locked' status of the terminal will display on the LCD.
EN
47 / 122
Publicité
Table des Matières
