K-FEE Java Square ID2 Mode D'emploi page 111

4
NOTE Your programmed cup
filling capacity may not be less
than the necessary quantities
for steps 4 and 5.
WARNING Very hot water –
scalding hazard.
Now leave the cleaning agent 2 minu-
5
tes to activate. Start the cleaning process
by pressing the "Large cup" button (mini-
mum quantity 100 - 200 ml). The cleaning
fluid may turn slightly green during the
cleaning process.
5
PROHIBITED
Do not drink the cleaning fluid
– health hazard.
Open the lever, activate capsule
6
ejection, close the lever and empty the
collecting container. Replace the empty
collecting container under the spout
again.
6
Now press the "Large cup" button
7
again to rinse the appliance out with fresh
water (do not insert a capsule!). Repeat
this process until the water dispensing
from the spout is clear.
7
To complete, remove the collecting
8
container and the water tank, empty them
and clean in hot water. Then fill the water
tank with fresh water and replace it in the
appliance with the drip tray.
21