Westfalia 342117600001 Notice De Montage page 2

SIARR
51 - 14
PREPARATION
* Lower the spare wheel.
* Make a cut in the bumper as per the sketch.
ASSEMBLY
* Position, then fix the tow bar body on the rear crosspiece
at the existing points (W) using fastening kit W.
FINISHING
* Tighten all of the nuts, bolts and screws
to the torques indicated below.
* Replace the spare wheel.
* Fasten the tow bar head to the points marked X.
FASTENING KIT
4 off HM14x100 screws
W
4 off CS14 washers
4 off dia.36/16,5 plain washers
1 off HM12x90 screw
1 off HM12x100 screw
X
2 off HM12 nuts
2 off CS12 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
! Affix the sticker in the position
Type Type
Approval No.
Tow bar for
e11*94/20*00*5880
Chrysler Gd Chero-
kee from 06/05 (Std)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM5114-E - FOLIO NDM
342117600001
Max. Total Max. Total
Authori. Weight Towable Weight
3 360 kg 2 750 kg
Max. Verti- Value
cal load D
140 kg 14,83 kN