Bond HYFP40205-65 Guide D'utilisation page 9

TO EXTINGUISH
※ Push the Control Knob and turn clockwise to the "OFF" position.
※ Turn the cylinder valve on the gas tank clockwise to close the gas supply if not in use for a long time.(See below
figure)
ROUTINE CARE
※ Keep your firebowl free and clear from combustible materials.
※ Visually inspect burner from obstructions, keep firebowl free and clear from debris.
※ After the burner and lava rocks are completely cooled down, use a soft brush to get rid of the mild stains,
loose dirt and soil. Wipe with a soft cloth.
STUBBORN STAINS
※Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions.
※Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur.
MAINTENANCE
※Store the firebowl in a cool dry place away from direct sunlight.
※The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored
indoors.
※Make sure both the gas and the firebowl are turned off before changing battery. Please refer to the process of
assembling battery.
※Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise this will void the warranty
of this product and may result in a hazardous condition.
※Please contact the Manufacturer for information regarding replacement hoses thermocouples ignitors lava rocks etc.
TROUBLESHOOTING
PROBLEM
Igniter pin and burner are wet Wipe dry with a cloth
Igniter battery is incorrectly
inserted.
Igniter pin cracked or broken
Fire table won't
Electrode wire is loose or
light
disconnected
Electrode wire is shorting
between valve and igniter pin
CAUSE
Check that battery is correctly inserted
Call customer service for replacement
part
Reconnect wire to the igniter
box located inside the table
base behind the igniter button
Call customer service for replacement
part
9
CORRECTIVE ACTION