Switching The Cooking-Zones On And Off; Residual Heat Indicator; Safety Switch Off Function - Sharp KH-6I19FTPP-EU Guide D'utilisation

2.After this disappear turn on the hob
by on/off key
3.Touch the 'A' and 'B'buttons at
the same time for 2-3 seconds. Then
default power limit will appear again.
4.Select the power limit by pressing
the '+' or '-' buttons.
5.Then press 'A' and 'B' buttons at the
same time for 2-3 seconds to set the
selected limit.
Now the hob is ready to use with new
power limit setting.
This setting is possible at any time and
is maintained until the next change.
Switching the cooking-zones
on:
Press the heater selection key you
wish to cook on. There is a static dot
indication on the selected heater display
and the blinking dot on all other displays
switch off.
Select the temperature setting by using
the increase heat setting key
decrease the heat setting key
. The element is now ready to cook
on. For quickest boil times, select the
desired cooking level and then press
the P key to activate the Boost function.
Switching the cooking-zones
off:
Select the element you want to switch
off by pressing the related increase
heat setting key
Using the
temperature down to ''0''. (Additionally,
using the and
or
.
key, turn the
keys
simultaneously turns the temperature
to ''0'')
If the cooking zone is hot, "H" will be
displayed instead of "0".
Switching all the cooking-zones
off:
To turn all the cooking zones off at once,
press the
In stand-by mode, an "H" appears on all
cooking zones which are hot.
Residual heat indicator:
Residual heat indicator indicates that
the ceramic glass
touch temperature in the circumference
of the cooking zone.
After switching off the cooking zone, the
respective display shows an "H" until
the assigned cooking zone temperature
is in an uncritical level.
Safety switch off function:
Every cooking zone will be switched
off after a defined maximum operation
time if the heat setting is not modified.
Every change in the cooking zone puts
the maximum operation time back to
the initial value of the operating time
limitation. The maximum operation time
depends on the selected temperature
level.
Wait until 'F' disappears for all
zones,turn the hob on by touching
and continue to use.
EN 9
key.
has a dangerous