Memory Full; Intercom; Call Transfer - Depaepe Telecom 23052011 Mode D'emploi

Memory full

There are 80 phone book memories.
When all memories have been stored in the phone book and you want to
add a new one number, the LCD will show memory full; in this condition
the user should delete some numbers which are stored in the phonebook.

Intercom

The intercom feature is activated by pressing and holding the "R/C" key for
3 seconds:
In standby mode.
Press "R/C" key for 3 seconds and the numbers of all registered
pendants will show on the display as well as an invitation to enter the
pendant number you wish to call.
The destination pendant will ring with the melody defined for internal
call.
Press the pendant red button to accept the call.
Once the internal call is connected, the white light will shine on the top
of the pendant.
To end intercom mode, either hang up the base unit or pendant.

Call transfer

To transfer the call from the base to the pendant.
Press "R/C" key for 3 seconds during conversation and you will be
invited to insert the pendant number you want the call to be transferred
to.
The destination pendant will ring with the melody defined for internal
call.
Press the pendant red button to accept the call.
The call will be connected to the pendant. To complete the transfer of
the call, you should hang up the base unit.
The call will transfer back to the base unit in case no answer on the
wanted pendant within1 minute, the base unit can press
or pick up the handset to resume the conversation.
45
key once