Safety And Compliance - Philips goLITE BLU HF3320 Mode D'emploi

- This appliance does not have an on/off switch. To fully disconnect the
appliance from the mains, remove the adapter from the wall socket.
Caution
- Use the appliance at a temperature between 0°C and 35°C.
- Only use the HQ8505 adapter supplied. If you use a different adapter
than the adapter specified and provided by Philips, this may result in
increased electromagnetic emission or decreased immunity of the
goLITE BLU energy light.
- Do not use the appliance outdoors or near heated surfaces or heat
sources (Fig. 3).
- Stop using the appliance if it is damaged in any way. If repair is needed,
consult chapter 'Guarantee and service' for information.
- Do not place heavy objects on the appliance, the adapter or the cord.
- Do not pull at the cord when you remove the adapter from the wall
socket. Always grasp the adapter.

Safety and compliance

- This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
- This appliance meets the requirements of Medical Device Directive
MDD 93/42/EEC and 2007/47/EC for medical appliances.
General
The adapter is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
- This is not a general illumination product.
ENGLISH
9