Weekly Maintenance And Cleaning; Safe Life; Intervention After Failure - CombiSteel 7478,0565 Mode D'emploi

B
C
MAX
MIN
A
A
7478,0130
WEEKLY MAINTANCE AND CLEANING

During cleaning, do not use sharp edged, cutting and drilling tools such as scraper, emery in no way.

Cleaning must not be done by spraying the water onto the device in no way.

If the device is used together with another device side by side, both devices must be cleaned parting them from their jointed places
without damaging the electrical connections.

13. SAFE LIFE

The safe life of the product is 5 years.

14. INTERVENTION AFTER FAILURE

FAILURES / CAUSES
• There is no heating. Energy lamp is lighting.
1. Thermal relay of thermostat can be opened. Taking the button out, it must be pressed on brown button severely.
2. Safety switch cannot be pressing on. The head part of it must be thoroughly seated.
3. Be sure that you opened the correct switch.
4. Be sure that you opened the correct thermostat.
5.Device has equipped by a safety thermostat against excessive heat. When the oil temperature exceeds 210ºC, safety thermostat puts into
operation and thermal relay switches off the energy supply. In this case, taking the thermostat button out its place, it is pressed on the thermal
relay reset button by a electric control screwdriver. Then, the device begins to work again. If the thermal relay does not switch the energy off,
there can be a failure with thermostat. Therefore, thermostat must be changed by technical service.
C
B
C
7478,0560
13/49
B
MAX
MIN
A
A
B
C