Help - REV 0514983555 Mode D'emploi

15. Help

Defect
Gong does not operate
Gong does not operate
When operating with
the radio module: no
function
When operating with
the radio module: gong
sounds without a radio
trigger from the trans-
mitter
When operating with
the radio module: no
signal trigger from
transmitter
When operating with
the radio module: no
signal trigger from
transmitter
No operation with USB-
module
USB-module does not
play the stored melo-
dies correctly
Melodies from the
sound module are not
played
A different melody is
played than before after
the batteries have been
replaced
22
Cause
Batteries perhaps
empty
Batteries perhaps
inserted incorrectly
Incorrect coding
Possible other radio
signals on the same
code
Batteries possibly
empty
Batteries perhaps
inserted incorrectly
USB inserted incor-
rectly
Possibly incorrect file
format
Sound module not
inserted correctly
Play data store has
been deleted
Remedy
Replace 3 x 1.5V LR14
baby batteries
Insert batteries as
shown taking care to
ensure correct polarity
Ensure transmitter and
receiver are set to the
identical code
Alter both the transmit-
ter and receiver to a
different identical code
Replace batteries
Insert batteries as
shown taking care to
ensure correct polarity
Remove the USB-mo-
dule and refit it correctly
Check to ensure the
files on the USB-modu-
le correspond with the
file formats listed in the
characteristics
Remove the sound mo-
dule and refit it correctly
The gong must be set
again using the selec-
tion keys