Dear customer,
Thank you for buying our high quality, expandable gong Clarino. Please
read the following operating instructions through carefully before star-
ting the gong.
1. Intended use
The gong is only designed to be used with the appropriate batteries or
with an 8V transformer (only when operating with a wired gong module).
Never connect it to other voltages.
2. technical data
Dimensions:
Voltage:
Operating temperature:
Batteries:
Operating frequency of radio module: 433MHz
Loudness:
The gong conforms to the applicable European CE guidelines.
3. Operating elements and connections
Fig. 1
(1) Volume controller (VOL)
(2) Module slot for wired gong module or radio module
(3) Expansion slot for sound module or USB-module
(4) Battery compartment for 1.5V battery (LR14 Baby)
(5) Connections for bell wiring
(6) „SEL "-selector for melody selection at T3
(7) Slide switch: „SEQ" - for changing melody at T3;
„SET" – to use a selected melody at T3
(8) Rotary switch to select the house code
170 x 126 x 50mm
8-12V~
0°- 40°C
3x1.5V LR14 Baby (not included)
max. 80dB/A
15