Connection Of The Transmitter With An Available Bell System - REV 0514983555 Mode D'emploi

8. Connection of the transmitter with an available bell system

(Only transmitter type 04281R2)
An available bell arrangement can be extended with this radio-con-
trolled gong.
The connection clips B & C (bell connection) must be connected with
an approx. 50cm long dual-core wire (bell wire) directly to the connec-
tions in the available bell signal system or gong. The distance between
bell and transmitter should be between approx. 30 to 40cm.
The cable must be lead out of the displayed section of the inner ca-
sing.
18
Receiver
Existing bell signal
system / gong
Existing bell
button
Transformer
Transmitter Type 04281R2
C
Transmitter
