BGS technic 63220 Mode D'emploi page 6

MANUAL
The software "AMcap" is a universal software for various tools and applications. In the following, only
those functions will be described, which are suitable for the USB-endoscope. The magnetic top can
be put on top of the camera head and allows you to look for and recover lost metal parts with the
camera. Plug the endoscope into a free USB-socket of your computer/notebook. Start the "AMcap"-
program (Start> Programs > Telescope Driver> AMcap). When the program is running, go to
"Devices" and chose "Telescope Driver". You will now be able to see the camera picture.
You can adjust the brightness 01 the picture with the lighting controller (5).
SNAPSHOT
Pushing the snapshot button cf your endoscope (4) will open a new window (snapshot reader) with a
snapshot picture. Go to "Rotate Orientation" to rotate the picture for a preset degree.
Save the snapshot via "File(F), Save· or delete the snapshot via "File (F), Exit".
USING „AMcap"
File Set Capture file
Exit
Options Preview
Capture Start Capture
Stop Capture
Set Time Unit
SHIPMENT
USB-endoscope in carrying case
Magnetic top
CD-ROM (driver and software)
Instruction manual
DISPOSAL
Electronic devices which are subject to the "ElektroG"-law,
are labelled as shown on the left.
Those devices cannot be disposed with residual waste,
but will be collected free of charge at your local collecting point.
SW-Stahl und Werkzeugvertriebs GmbH
L e v e k r u s r e t S a r s s e 6 5
D 4 - 2 8 9 7 R e m s c h e d i
Chose the directory for your saved videos (.avi). You have to add the
program ending ... avi" to your file.
Cancels the program.
Shows the picture in real time (function has to be activated)
Starts recording a video. You have to confirm the directory for your
saved flies with "OK".
Cancels the recording procedure.
Configures the maximum recording time (in seconds).
Tel. +49 (0) 2191 / 46438-0
F ax +49 (0) 2191 / 46438-40
- E M a : l i n i o f @ s w s a t l h d . e