Overview Over The Function Buttons - Futurelight CP16 Mode D'emploi

CAUTION: When you turn the device on, the controller is in blackout-mode (Blackout-LED on).

OVERVIEW OVER THE FUNCTION BUTTONS

1) POWER SWITCH
2) DISPLAY ROTATION SETTINGS
3) ROTATION UP/DOWN BUTTONS
4) GOBO-COLOR/STROBO DISPLAY
5) GOBO-COLOR/STROBO UP/DOWN BUTTONS
6) GOBO-COLOR/STROBO SELECTOR BUTTON
If the LED is on, you can choose the desired gobo with the respective color. If the LED is off, you can choose
the strobe effect.
7) OPERATING DISPLAY
8) OPERATING UP/DOWN BUTTONS
9) PROGRAM BUTTON
With the program button you can choose the different programs
1-10 Freely programmable chasers
11-20 Pre-programmed programs
10) SPEED BUTTON
11) WRITE BUTTON
12) AUDIO/PULSE BUTTON
13) PAUSE BUTTON
With the pause button you can stop the mirror movement.
14) BLACKOUT BUTTON
If the LED is on, the respective scanner is in stand-by mode.
15) PROJECTOR SELECT BUTTONS
With the projector select buttons you can choose the desired projector. If the LED is off, the respective
scanner is in blackout mode. If the LED is permanently on, the projector runs through the current program. If
the LED flashes, the scanner can be controlled manually or be programmed. If several scanners are chosen,
they will be synchronized.
16) JOYSTICK
With the joystick you can move the mirror manually.
OPERATION
Manual control
Choose the desired projectors with the projector select switches 1-4 (LED flashes). You can also choose
several scanners, which will be synchronized then. The projector runs through the program until you move
the joystick or change any setting.
-You can move the mirror with the joystick
The rotation speed and direction of the effects with effect wheel can be adjusted with the Rotation UP-DOWN
buttons.
The different values of the Rotation display are (only for FX-150, RT-150, DF-250 DMX and Brilliant Flower
DMX):
11