Safety Instructions - Futurelight CP16 Mode D'emploi

For your own safety, please read this user manual carefully before your initial start-up.
Every person involved with the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
INTRODUCTION
Thank you for having chosen a CP16 CONTROLLER.
The CP16 CONTROLLER is a DMX controller especially designed for the Futurelight effects Scan H-150,
CC-150, FX-150, RT-150, DF-250 DMX und Brilliant Flower DMX.
The CP16 CONTROLLER features four addresses. The number of effects per address is unlimited.
Unpack your CP16 CONTROLLER.
Before your first start-up please make sure that there are no damages caused by transportation. Should there
be any, do not take the device into operation and consult your dealer.

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Never let the AC-cord come into contact with other cables! Handle the AC-cord and all AC-connections with
particular caution! Never touch these parts with wet hands!
Make sure that the available voltage is not higher than stated on the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
USER MANUAL
9