Overview - Futurelight CP-256 Mode D'emploi

4.2 Overview

Overview on the control elements
1 2
CP•256
10
8
6
4
2
0
1 2 3 4
1) CHANNEL FADERS
For adjusting the different DMX-values. The channels 1-8 can be adjusted directly after pressing the
respective projector select button. The channels 9-16 can be adjusted after pressing the Menu-button.
2) PROJECTOR SELECT BUTTONS
With the Projector select buttons you can choose the desired projector.
3) MANUAL BUTTON
By pressing the Manual button, you can adjust the projector manually.
4) RECALL BUTTON
By pressing the Recall button, the manual mode is deactivated.
5) SEQUENCE BUTTON
6) UP/DOWN BUTTONS
By pressing the respective button, you can adjust the settings stepwise. If you hold the respective button,
the display moves upwards or downwards, respectively.
7) MENU BUTTON
By pressing the Menu button, you can move within the main menu.
In the manual mode, you can switch the channel faders from CH 1-8 to CH 9-16 by pressing the Menu
button.
8) DISPLAY
9) LEFT/RIGHT BUTTONS
10) ESC BUTTON
Via the Escape button, you can exit the active menu. If there are any changes, you can save them via
the Enter button or cancel them via the Esc button.
11) ENTER BUTTON
For confirming the adjustments.
12) SCENE BUTTON
13) PROGRAM BUTTON
14) RECORD BUTTON
15) COPY BUTTON
16) JOYSTICK
With the joystick you can move the light beam manually.
17) DATA ENTRY FADER
18) SPEED-FADER
19) RATE-FADER
20) MUSIC TRIG BUTTON
If this LED flashes, the controller is in Audio-mode (operation with sound-control).
21) POWER/BLACKOUT BUTTON
With the power switch, you can take the controller into operation.
The Blackout-function closes the light output of all connected projectors via the shutter.
Caution: The Blackout-key has to be pressed (LED is off), as soon as a program is called up. Otherwise
there will not be any light output.
3 4 5 6 7
Future light
SEQUENCE UP
10
RECALL DOWN
8
6
SPECIAL UNIT
LEFT
4
MANUAL MENU
2
0
CH 1-8
CH 9-16
6 7 8 9
5 10
A
8 9 10 11 12 13 14
FUNCTION SELECT
R
SCENE PROGRAMM RECORD COPY
FUTURELIGHT CP-256
PRESET
FUTURELIGHT CP-256
SCENE EDIT MASK
RIGHT ESC ENTER
ALL RESET
LAMP ON
11 13 14 15 16
12
B C D E F 0
27
15 16 17 18 19 20
DATA SPEED RATE
ENTRY
10 10
8 8
MACRO
6 6
MIRROR
4 4
2 2
0 0
POWER
ON-OFF
MUSIC BLACK
OUT
21