Belkin F5D7000 Manuel De L'utilisateur page 32

Masquer les pouces Voir aussi pour F5D7000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Troubleshooting
Installation CD-ROM does not start Wireless
Networking Utility.
If the CD-ROM does not start the Wireless Networking Utility
automatically, it could be that the computer is running other
applications that are interfering with the CD drive.
If the Wireless Networking Utility screen does not appear within 15–
20 seconds, open up your CD-ROM drive by double-clicking on the
"My Computer" icon. Next, double-click on the CD-ROM drive that
the Installation CD has been placed in to start the installation. Then
double-click on the folder named "Files". Next, double-click on the
icon named "Setup.exe".
Power LED does not come ON; Card is not working.
If the LED indicators are not ON, the problem may be that the Card is
not connected or installed properly.
Verify that the Card is plugged firmly into the PCI slot of your
computer. Check to see that the drivers for the Card have been
installed. Right-click on the "My Computer" icon on your desktop.
Choose "Properties" and navigate to the "Device Manager" and see if
your Card is listed without any errors. If an error is indicated, contact
Belkin Technical Support.
Link LED is blinking slowly; cannot connect to a wireless
network or the Internet.
If your Card appears to be functioning properly, but you cannot
connect to a network or you have a red wireless icon at the bottom
of your screen, the problem may be that there is a mismatch between
the network name (SSID) settings in your wireless network properties.
Check the SSID settings to see if they match. The SSID is
case-sensitive and the spelling on each computer must be exactly
the same in order for the Card to connect to the
wireless router (or access point).
Note: To check the SSID settings or look for an available network,
double-click the Signal Indicator icon to bring up the "Wireless
Networks" screen. Click "Add" if you do not see the network you are
trying to connect to and type in the SSID.
For more information about setting up an SSID, please refer to your
router manufacturer's user manual.
If issues persist even at close range, please contact Belkin Technical
Support.
30
30

Publicité

Table des Matières
loading

Table des Matières