Configuring Your Belkin Wireless G Desktop Card To Use Security - Belkin F5D7000 Manuel De L'utilisateur

Using the Belkin Wireless Networking Utility Using the Belkin Wireless Networking Utility
Configuring your Belkin Wireless G Desktop Card
to use Security
At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain a wireless
connection, you will need to set your Wireless G Desktop Card to use
the same security settings.
Changing the Wireless Security Settings
The Belkin Wireless G Desktop Card supports the latest WPA security
feature as well as the legacy WEP security standard. By default,
wireless security is disabled.
To enable security, you will first need to determine which standard is
used by the router or access point. (See your wireless router's or access
point's manual for directions on how to access the security settings.)
To access the security settings on your Card, click the "My
Connections" tab and point to the connection for which you want to
change security settings. Click "Edit" to change settings.
20 20