ARENDO 304831 Mode D'emploi page 29

After completing the blending process, please remove the blending jar from the
base unit and disconnect the plug from the socket.
Note: The appliance is designed only for brief periods of operation. Allow the
appliance to cool down for approx. 2 or 3 minutes of continuous operation before
you reuse it (about 10-15 minutes)!
9. Cleaning and Care
Unplug the power cord from the mains outlet. Clean the base unit with a slightly
dampened soft cloth. Caution! Do not use liquids to clean the base unit and the
power connections. Do not use any aggressive, strong or abrasive cleaning agents.
You can clean the blender jar, the lid and the blade unit in soapy water. The blender
jar and the lid can also be cleaned in a dishwasher.
To clean the appliance quickly and immediately after use, fill the blender jar with
warm water up to about 60 %, add some detergent and let the appliance run brief-
ly. Then, take the blender jar and shake it. Finally, rinse only the blender jar and
the blade unit using clean water until all residue and traces of the detergent are
removed.Allow all parts of the appliance to dry completely!
10. Important safety guidelines for this appliance
• Never use this appliance without placing the lid on it!
There is a risk of injury!
• Do not use dry ingredients and ensure that there is
enough liquid in the blender jar.
• Never operate the appliance in a dry condition.
• Check the appliance for damage every time before use. Do not
operate the appliance if the cable, the plug or the appliance show
any visible signs of damage.
• Do not make any modifications or repairs to the appliance.
• Caution! The blade unit is very sharp!
• Plug the appliance only into a properly installed power socket!
• Never leave the blender unattended and choose a location in
which the appliance is out of reach of animals and/or children.
• Children should not play with the appliance.
• This appliance can be operated by children from 8 years of age and
English
29