Assembly - Klarstein MAXFLOW SMART Mode D'emploi

EN
18

ASSEMBLY

Accessories
Rollers with brake (2x)
Rollers without brake (2x)
Ice box (2x)
Assembly
Open the packaging and carefully remove the device. Place it on a firm and
1
level surface.
2 Check that the accessories match the list.
Take out the casters and attach them to the bottom of the unit. Attach the rollers
3
with brakes to the back and the rollers without brakes to the front.
Check that the separate plate of the water tank is in place and that the filter is
inserted.
4
Ice box
(insert left)
Fill water into the tank and place the ice box inside before fixing the water
tank.
5
Rollers without
brake
Rollers with brake
Instruction manual (1x)
Remote control
Separate plate
Rear view