Adjustments - Pattfield Ergo Tools PE-20 AGB Traduction De La Notice Originale

ATTACH BATTERY
1 Slide the battery 9 (not included) onto
the grinder until it clicks into place.
Caution! Only use the batteries
specified in technical data.
AUXILIARY HANDLE
1 The auxiliary handle 5 can be attached
to the auxiliary handle connector on ei-
ther side of the tool.
Caution! Make sure the tool is
switched off and the battery re-
moved.
GRINDING GUARD
1 Remove inner 3 and outer flange
while pressing spindle lock button 2.
Attach grinding guard 1 and align it, so
that it protects from sparking.
Caution! Make sure the tool is
switched off and the battery re-
moved.
DEPRESSED GRINDING WHEEL
3a Install the wheel with its raised centre
facing the machine. Install the outer
flange 4 with the smaller side facing
the grinding wheel.
Tighten the outer flange 4
wrench, while pressing the spindle lock
button 2.
ON / OFF
1 To switch on the tool, press the lower
part of the on / off switch 6
the switch forward. Pressing the top
part of the on / off 6 switch locks it in
on position.

Adjustments

144 EN
2 To release the battery, press the bat-
tery release switch 7 and slide the bat-
tery 9 off the grinder.
2 Screw the auxiliary handle
auxiliary handle connector.
For safe working conditions, make
sure the auxiliary handle is always
mounted to the tool.
4 2 Close the guard release lever. Securely
tighten the grinding guard
wrench and reinstall inner
flange 4, while pressing the spindle
lock button 2.
STRAIGHT GRINDING WHEEL
3b Install the grinding wheel with the larg-
er side of the outer flange
grinding wheel.
Tighten the outer flange
with the wrench, while pressing the spindle lock
button 2.
2 To switch off the tool, release the on /
and push off switch 6. If the switch is locked,
press the lower part of it to unlock it.
Let the wheel come to standstill with-
out applying pressure to its surface.
1
5 into the 1
1
1
with the
3 and outer
3a
4 facing the
4 with the
1
2
1.
2.
2
2
1.
2.
3b
2
1.
2.
2.
1.