Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play mode. During System settings mode,
rotate the SELECT control to select Inactive Standby and then press it to confirm. The display will show : Off
> 2 hours > 4 hours > 5 hours > 6 hours. Rotate the SELECT control to and then press it to confirm.
Language
The default language is English. To select other languages, rotate the SELECT control followed by pressing
on it to confirm.
Factory reset
Perform a factory reset returns the unit to factory settings. All manual settings such as time, date, network
configuration and presets are deleted. The radio's current software version is not affected and remains as
it was registered in the Internet-Radio-Portal. Favourites in the Internet radio remain until newly registered
with another account in the Internet portal.
Software update
Software updates are made available from time to time. You can either check manually or let the radio to
check automatically. If a new software version is found, the radio prompts you to confirm. The new software
will be downloaded and installed upon getting your confirmation. User settings are maintained.
Note: Before downloading software, ensure that the radio is plugged into a stable mains power connection.
Interrupting the mains supply during a software download can lead to functional disturbances and/or dam-
age to the unit!
Info
Displays the firmware version and the Radio ID
Internet Radio
This radio can play thousands of radio stations and podcasts from all over the world via a broadband in-
ternet connection. When the Internet Radiomode is selected, the radio connects with the Frontier Silicon
Internet radio portal to download a list of stations. Once a station is selected, the radio will connect directly
to that station.
To enter Internet Radio mode, either press MODE until the display shows „Internet radio" or select „ Inter-
net radio" in the main menu by the use of the SELECT control.
26
www.auna.de