Power On/Off; Adjusting The Focus; Main Screen - AIPTEK AN100 Mode D'emploi

User's Manual
Charging LED Indicator
During charging, the LED of Power On button will flash. When
the battery is fully charged, the LED turns to solid blue.
Power On / Off
Push the Power button for 2 seconds to turn on the projector.
Push the Power button again for 3 seconds to turn off the
projector.
Adjusting the
Focus
Place the projector on a
flat surface and toward a
wall or a projection screen.
Adjust the focus by turning
the focus ring to get a
sharp and clear picture.
Note: Use a tripod to increase the height of the projectional
image when necessary. The tripod socket is located under the
projector.

Main Screen

Power on the projector, the following screen appears after the
projector boots up.
8