Installation And Adjustments; Tools; Manner Of Delivery; Assembling The Lift Chair - Vermeiren Montreal Manuel D'utilisation

5

Installation and adjustments

WARNING
• Only use the settings described in this manual.
• Make sure that your fingers, clothes, belts, buckles or jewellery won't get caught by moving
parts, during assembly, use or adjustment.
5.1

Tools

No tools are needed to set up the lift chair.
5.2

Manner of delivery

Unpack your product and verify if the delivery is complete. The following items should be included:
• Frame with seat, armrests, leg rest and lower frame
• Backrest
• Headrest cover
• Controller
• 4 wheels (Optional: 2 wheels + 2 leg levelers)
• Manual
Verify your product for transport damage. If you find any damages after delivery, contact the
transporter.
5.3

Assembling the lift chair

The lift chair is delivered fully assembled with the exception of the backrest and the wheels.
5.3.1 Mounting the backrest
1. Place the backrest with the two sleeves (1) on the plates (2) mounted on the
seat.
2. Push on the upper side of the backrest until it clicks into place.
3. Make sure that the backrest is firmly fixated by pulling it slightly up again. If
the backrest comes loose, repeat the steps above.
4. Attach the loose backrest upholstery to the lower frame with the Velcro strips.
5.3.2

Removing the backrest

1. Loosen the backrest upholstery by pulling the Velcro strips
off the lower frame.
2. Use a flat head screwdriver or other tool to pull the locking
clip upwards. At the same time, pull the backrest upwards
until the two connection plates are released.
3. Lift the backrest out of the lower frame.
5.3.3 Mounting the wheels
The lift chair is delivered with a number of wheels according to your chosen
version and option. To fasten the wheels into place, use the nuts (3) that are
included with the delivery.
Risk of injuries or damage
8
Montreal
2020-06
Installation and adjustments
1
2
3
EN
NL