Smartpond 36122 Mode D'emploi page 4

It is the responsibility of the owner of the water system and its attendant units to
ensure their maintenance and care in compliance with the laws, directives and
instructions laid down for this purpose. In order to avert harmful contamination,
we urgently recommend the user to ensure cleaning and care of the water
system and the water feature including the nozzle, and to take all necessary
measures to maintain the technical units, such as pumps, tubing, connectors,
under-water lighting, and nozzles to keep them in functional order in line with
safety aspects. However, the maintenance and care obligation is not limited to
the technical products supplied, but encompasses the entire system.
We also recommend the owner to keep records of the dates when maintenance
and care was carried out, and to document all water tests made in conjunction
with the water feature. The owner is solely responsible for guaranteeing the
safety of the water feature. Use or maintenance of the units sold and the system
are beyond GeoGlobal Partner's influence. GeoGlobal Partners can only be held
liable for manufacturing faults of smartpond
WARNING
• Risk of electic shock. When used outdoors, install only to a covered Class A
GFCI protected receptacle that is weatherproof with the power unit connected
to the receptacle. If one is not provided, contact a qualified electrician for
proper installation. Ensure that the power unit and cord do not interfere with
completely closing the receptacle cover.
• Risk of fire. Installation involves special wiring methods to run wiring through
a building structure. Consult a qualified electrician.
• Risk of electric shock. Mount the unit at a height greater than 1 foot from the
ground surfaces.
• Read and follow all safety instructions that are on the product or provided
with the product.
• Do not use an extension cord.
• Do not exceed the voltage shown on the transformer.
• Do not submerge the transformer.
• To reduce the risk of fire or injury, keep lights away from materials that may
burn.
• Always disconnect the fogger from the power source before beginning any
maintenance or work on it.
• Inspect cord for damage before installation and/or maintenance. Replace the
entire fogger/transformer assembly if damage is found.
CAUTION
• Use a proper power source as indicated on the transformer label.
• Keep the cord away from high temperatures or other heat sources.
• Do not lift the transformer by its power cord.
• This fogger assembly is not intended for use in swimming pools or hot tubs.
• Installation work and electrical wiring must be done by a qualified person(s)
in accordance with all applicable codes and standards, including fire-rated
construction.
• Installation should be done in accordance with the National Electric Code,
ANSI/NFPA 70.
2
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
units.
®