Hotpoint Ariston Aqualtis AQXL 145 Mode D'emploi page 17

knob
button with indicator light
button with indicator light
press the button briefly to switch the machine on or
off. The green indicator light shows that the machine
is switched on. To switch the washing machine off
during a wash cycle, press and hold the button for
approximately 2 seconds; pressing the button quickly
or accidentally will not switch the machine off.
If the machine is switched off during a wash cycle,
the programme will be cancelled.
knob: this can be rotated in both
directions. To set a more suitable programme, please
refer to the “Table of Programmes”.
The knob is locked into position during the wash cycle.
button: press this button to
adjust the temperature; the value will be identified by the
indicator lights above it (see “Running a wash cycle”).
button: press this button to adjust
the spin value or to exclude this part of the
programme; the value will be identified by the indicator
lights above it (see “Running a wash cycle”).
button:press to set a delayed
start time for the selected programme; the delay time
will be identified by the indicator lights above (see
“Running a wash cycle”).
buttons and indicator lights: may be used to
select any of the available options. The indicator light
corresponding to the selected option will remain lit
(see “Running a wash cycle”).
buttons and
indicator lights
button
button
button
:
provide an indication of the progress of the wash
cycle (Wash
phase ).
The text
green indicator light flashes slowly, press the button to
start the wash cycle. When the cycle has started, the
indicator light is illuminated in a fixed manner. To
pause the wash cycle, press the button again; the
indicator light will turn orange and begin to flash
again. If the “Door Locked”
the porthole door may be opened.
To restart the wash cycle from the point at which it
was interrupted, press the button again.
the porthole door is locked. To open the door, pause
the wash cycle (see following page).
used to enable or disable the “Child lock” function, by
pressing the button for approximately 2 seconds.
When the indicator light is illuminated, the control
panel is locked. This avoids accidental changes being
made to the wash cycles, especially where children
are at home.
indicator light: the
electricity saving reaches at least 10% (this can be
achieved by adjusting the wash cycle settings).
button with indicator light
icons
indicator
light
indicator light
icons: these light up to
- Rinse - Spin - Final draining
lights up when the cycle has finished.
button with indicator light: when the
indicator light is off,
indicator light: this indicates that
button and indicator light: this is
icon lights up when the
button and indicator
light