USB devices
USB device playback
1
Open the USB cover.
2
Connect the USB device to the USB
terminal.
Playback starts.
If a USB device is already connected, to start
playback, press (SOURCE) repeatedly until
"USB" appears.
Press (OFF) to stop playback.
Notes
• Before removing a USB device, be sure to stop
playback first. If you remove your USB device during
playback, data in the USB device may be damaged.
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
• Do not detach the front panel during playback of the
USB device, otherwise USB data may be damaged.
Display items
A ATRAC Audio Device: AAD
Mass Storage Class: USB
10
B Track/Album/Artist/Playlist/Genre number,
Track/Album/Artist/Playlist/Genre name,
Elapsed playing time, Clock
To change display items B, press (DSPL).
Tip
Displayed items will differ, depending on the recorded
format and settings. For details on MP3/WMA/AAC/
ATRAC, see page 16.
Note
The display differs depending on the Mass Storage
Class type USB device, and ATRAC Audio Device.
Listening to music on a Mass
Storage Class type audio device
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
SHUF ALBUM
SHUF DEVICE
To return to normal play mode, select "
or "SHUF OFF".
Listening to music on a "Walkman"
(ATRAC Audio Device)
1
During playback, press (MODE)
repeatedly until the desired setting
appears.
The item changes as follows:
ALBUM t TRACK t GENRE t
PLAYLIST t ARTIST
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
TRACK
ALBUM
ARTIST
PLAYLIST
GENRE
SHUF ALBUM
SHUF ARTIST
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.
OFF"
To play
track repeatedly.
album repeatedly.
artist repeatedly.
playlist repeatedly.
genre repeatedly.
album in random order.
artist in random order.