Installing The Smartphone Adapter - Celestron Astromaster 90 AZ Mode D'emploi

INSTALLING THE SMARTPHONE ADAPTER

1 CONNECT THE ADAPTER
Squeeze the lever to open the clamp . Position the clamp
around the eyepiece and release . Tighten the safety lock .
2 ATTACH YOUR PHONE
The adapter works with regular phone cases, but you
will need to remove "folio-style" cases . Extend the slider .
Place your phone on the platform, making sure the bottom
is touching the rubber base . Release the slider . Your
phone is now secure and ready for imaging .
3 ALIGN AND SHOOT
Open your camera app . Position your phone over the
eyepiece using the X and Y axis knobs . Then, use the
Z axis knob to move closer or further away from the
eyepiece until you have achieved your desired framing .
Finally, adjust the focus using the focuser on your optics
and snap the image .
For more tips and tricks, visit celestron .com/blogs/knowledgebase/smartphone-adapter-tips
12 I ENGLISH
Z
Y X