Starting/Stopping Sound From Remote Microphone; Regulating Level From Remote Microphone - oticon ConnectClip Mode D'emploi

Starting/stopping sound from remote microphone

Stop sound from Microphone
Press and hold multi-button (A) for approx. 3
seconds to stop the signal from the microphone
A
to the hearing aids and switch the hearing aids
back to their normal program.
The status indicator will change to
YELLOW or BLUE
32

Regulating level from remote microphone

Volume up or volume down
The streamed signal can be adjusted
using the volume up/down buttons.
Mute Hearing aid microphones
(only sound from the remote
microphone).
Press and hold volume down
for about 3 seconds to mute
the hearing aid microphones.
Short press volume up or down
will unmute hearing aids.
Volume up
Volume down
33