Pairing Mobile Phone With The Connectclip - oticon ConnectClip Mode D'emploi

B. Pairing mobile phone with the ConnectClip
A
Place ConnectClip in pairing mode
Press and hold the multi button AND
volume up button for about 6 seconds
(A) until status BLINKS BLUE
The ConnectClip will be in pairing
mode for about 3 minutes.
18
Enable pairing on mobile phone
Turn on Bluetooth. Search for and connect to/pair
with ConnectClip.
This is normally in the settings/Bluetooth section
of your phone.
Enter pin code
If your phone requests a pin code enter 0000 (four zeros).
Pairing complete
Pairing complete with mobile phone
is indicated by status STEADY BLUE
19