Measuring Resistance - IDEAL 61-737 Manuel D'utilisation Et De Sécurité

Verifying Continuity (
• Verify the circuit is de-energized.
• The meter will sense the level of resistance and a beep if the resistance is less
than 10 Ω to confirm that continuity is present.
• Red LED will illuminate and resistance value will be displayed.
• The default setting is Continuity.
Measuring Resistance (Ohms / Ω )
Verify the circuit is de-energized to obtain accurate measurements.
)
To exit Continuity and enter
the Resistance mode,
Press the SEL Button
15